Jiangxi Kapa Gas Technology Co.,Ltd
Benchmarking the World-class brands
Add to Cart
1.06 m³ / min stable Screw Air Compressor 7.5kw 10hp 0.8 Mpa
Description
Screw air compressor adopts high-capacity compression components, its rotor outer circle speed is low and the best oil injection is achieved, which realizes high efficiency and high reliability. The design can ensure that the system temperature and compressed air temperature are extremely low. Ensure that all parts achieve the best cooling effect and maximum service life.
Specification
| Model Specification | KB7.5-10P |
| Displacement/Pressure (M³/Min/Mpa) | 1.06/0.8 |
| CFM | 37 |
| Power Kw/ HP | 7.5KW/10HP |
| Ambient Temperature ℃ | 2℃-45℃ |
| Cooling Mode | Air-Cooling |
| Discharge Temp | ≤Ambint+15℃ |
| Lub Oil Capacity Liter | 5L |
| Noise Level Db(A) | 70±2 |
| Driven Mode | Direct Drive |
| Power V/Ph/Hz | 380V/50Hz |
| Starting Mode | power frequency |
| Dimension mm | 900*650*870 |
| Net Weight kg | 191 |
| Out let Diameter inch | RP1/2 |
Screw Air Compressor : Energy saving and stability + convenient maintenance + superior price = high cost performance ratio
Unique design
Compressed Air Vessel:Reduce the pressure ； energy conservation ； Low oil content ,ensure that the oil content in the air is less than 3ppmand high quality air .
Oil gas separator with built-in oil separation core in new structure .
High efficiency air end , low noise bearing and oil mist cooling are adopted to maintain stable operation of the chamber .
Large surplus heat dissipation area design, strong heat dissipation effect, avoid high temperature shutdown ； Intelligent cooling fan design, can automatically start cooling according to air temperature.
Adopt stainless steel pipe, high temperature and low temperature resistance
electric motor:Adopt imported high quality electrical equipment to ensure the normal operation of the machine.
There is no intermediate transmission, so there is no energy loss
The larger rotor runs at a lower speed, with higher efficiency and further reduces energy consumption
It avoids the situation that the hand is unbalanced in the belt drive, easy to generate heat, easy to break, frequent belt replacement, and often need to readjust the levelness of the pulley and the tension of the belt
Due to the coaxial transmission of elastic coupling, the force is balanced, the vibration is reduced, the reliability is increased and the maintenance cost is reduced
Screw air compressor work flow chart
Purchase knowledge editor
Exhaust pressure
The greater the discharge pressure of compressor, the more energy consumption. The sum of using pressure, pipeline resistance loss and pressure drop of supporting equipment is set as the lower limit of rated exhaust pressure of screw air compressor. Generally, the diameter of gas transmission pipeline should be larger to reduce resistance loss and achieve the purpose of long-term operation and energy consumption reduction. The greater the discharge pressure of compressor, the more energy consumption. So don't choose compressor with high discharge pressure
Displacement
The coefficient of actual total gas consumption ≛ 1.1-1.2 is calculated. As the type of air displacement selected, if it is too low to meet the specified value of gas consumption equipment, and if it is too large, it will result in large energy consumption and uneconomical operation under load reduction. At the same time, the purchase cost of large displacement screw air compressor is higher.
Compressed air quality
According to the requirements of the industry gas equipment for compressor gas, screw air compressor and supporting equipment should be purchased appropriately. The following points should be considered:
In order to reduce the oil content in the compressed gas, the oil purifier can be used. If the treatment index is high, the multi-stage treatment can be selected.
In order to reduce the water content in compressed gas, water removal equipment can be used.
Advantages of Kapa brand
1. High quality control(ISO 9001-2000/ISO14001/ASME/Energy saving certificate)
2. Fast Delivery( 25-30 days for large orders)
3. Good service for pre-sale,after-sale( strong technical support and professional after-sales team)
4. Small order acceptable( Ordering quantity according to your actual needs)
why choose us ?
Longer service life of the master machine
The rotor uses asymmetrical line running at a low speed with the support of the ball bearings and roller bearings as a result. The damage and the cost are lowered and the service life is extended. Some force is counteracted by the axial force generated by the bevel gear. So the load on the bearings of the master machine is lowered.
Permanent alignment of the electromotor and the master machine
Different from the strap compressor, the SRC series compressor can integrate the electromotor with flange, shaft coupling box-gear box. and the master machine into one in such way the master machine and the electrometer are aligned forever in the transpiration. The SRC series compressors equipped with effective and fully sealed air-cooling electromotor.